Drafters Forum | JOBS | Drafting Standards | Funnies | Technical Dictionary | AutoCAD Tutorials | Free Lisp | Free Blocks

ARTICLE: Top ways drafters can make money online with Freelancer.com

Drawing Sheet Layout (Metric)

From Draftsperson.net

Revision as of 02:47, 31 October 2011; view current revision
←Older revision | Newer revision→

By Steve

Standard layouts of drawing sheets are specified by the various standards organizations.

This is the layout of a typical sheet, showing the drawing frame, the microfilm camera alignment marks, a typical title block, parts list and revision table:

Image:Sheet1.gif

Sheet Frames

It is standard practice for a drawing frame to be printed on each sheet, defining a margin around the outside of drawing area. Drawing frames are standardized for each size of paper as per the following table:

Drawing Frames with No Filing Margin

Paper Size Border Width (mm)</font> Dimensions of Drawing Frame (mm)</font>
  Left &
Right
</font>
Top &
Bottom
</font>
Width</font> Height</font>
A028201133801
A12014801566
A21410566400
A31074003283
A475283200

Title Block

The title block is normally placed in the bottom right of the drawing frame, and it should contain the following information:

  • the name of the company or organization
  • the title of the drawing
  • the drawing number, which is generally a unique filing identifier
  • the scale
  • the angle of projection used, either first or third, generally shown symbolically
  • the signature or initials of the draftsman, checker, approving officer, and issuing officer, with the respective dates
  • other information as required

Material or Parts List

If the drawing contains a number of parts, or if it is an assembly drawing, a tabulated parts list is attached to the bottom right of the drawing frame, just above the title block. The parts list should give the following information:

  • the part number
  • the part name
  • the quantity required
  • material specifications
  • the drawing number of each individual part
  • other applicable information

When the parts list is very large a separate drawing sheet may be used for the parts list alone.

Revision Table

A revision table is normally located in the upper right of the drawing frame, or at the bottom on the left side of the title block. All modifications to the drawing should be documented here.

Zoning

A drawing may be divided up into a grid using letters and numbers. When zoning is used it is located inside the drawing frame. Zoning allows easy references to various parts of the drawing by referencing a coordinate such as C/7.

Need drafting work?

We are having great success with Freelancer.com. With this website we can win all types of drafting work. People from all over the world are looking for freelancers skilled in AutoCAD, Revit, Civil 3D and Microstation, are you one of those people? If so you can live the freelancer lifestyle! and work from any location you want too. Freelancer.com, it works really well - we like it - and we believe you will too.

Looking for CAD drafters?

With modern construction, software and increased legal requirements, we often require specialized assistance with our projects. Putting skilled staff on full time is not always economically feasible for small businesses. Freelancer.com solves this problem. On this website you can engage skilled drafters. Either on fixed prices for specific tasks, or reasonably priced hourly rates for longer term contracts.

E-book: AutoCAD Block Best Practices

We draw repetitively when using AutoCAD. If we manage the drawing elements as reusable contents, it will increase our productivity significantly. Not only can we draw faster, we can add information to our blocks. Which allows us to generate useful reports. This is what Edwins e-book entitled AutoCAD Block Best Practices is all about. Yes, increase your productivity with the block!



Printable version

Toolbox

Views

Main Page | Free AutoCAD Blocks | Free Revit Families | Funnies | Drafting Standards | Drafting & CAD Forums | Structural Drafting | Technical Dictionary

Personal tools

MediaWiki